You may find this of use, originally aimed at iPhone customers on the O2 network but should work on most networks and with all handsets (details taken from O2 website):

Can I increase the length of time my iPhone rings before diverting to voicemail?

Yes, just like any other handset you can change the length of time the iPhone rings before diverting to voicemail by entering **61*901*11*NN# SEND (NN is the number of seconds in increments of 5 and a maximum of 30 seconds).

Important Note:

In the example above 901 represents the number O2 customers dial to access their voicemail (irrespective of whether you are using an visual voicemail on an iPhone, 901 always dials into your voicemail system)

If your network uses a different (short) voicemail access number then simply substitute this and do not use 901

I have tested this on the O2 network and it works perfectly on the handsets I tried:  iPhone, Nokia, Sony Ericsson.  Each handset gives a different response (text) due to their operating system but usually it confirms that a voice call divert is active or similar (which is correct as your voicemail is simply a network function diverting unanswered calls to your voicemail account).

There’s no reason why it won’t work on all handsets and networks providing the network allows it’s subscribers to configure this setting.

Entering the above string of numbers isn’t the same as dialling a telephone number, although you do dial it like you would do a normal number.  Your handset recognises it’s a network code and sends the instruction to your carrier and waits for a success/failure response which it then displays on your screen.  You are not actually placing a voice call.

Obviously I cannot guarantee that this will work for you so all the usual disclaimers apply, and your mileage may vary.

Let me know how you get on.

© Richard for The MacTrack - iPhone, iPod, iPod Touch and Mac News, 2009. | Permalink | No comment | Add to del.icio.us
Post tags: Mobile, voicemail

Feed enhanced by Better Feed from Ozh

If, like me, you have some smart playlists lovingly created within iTunes.

Whilst simple to create these smart playlists can be extremely powerful and can dynamically select music tracks (or other content) depending on their pre-set criteria.  By carefully selecting the criteria you can develop playlists that always have relevant and ever changing content, automatically.

Now, suppose you want to create a new Smart Playlist based on an already pre-existing smart list and then make some minor changes to it?  Apart from recreating the entire playlist from scratch again is there a way to help automate this somewhat?

Yes, there is!  Simply:

STEP 1

Select the playlist you want to base your new one on

Go-to the File Menu
Choose Library…
Select Export Playlist…

In the Format drop-down list choose XML
Save the file to your desktop

STEP 2

Next, import the playlist:

Go-to the File Menu
Choose Library…
Select Import Playlist…

Choose the file you exported in step 1.

iTunes will import the playlist’s selection criteria, not the actual tracks, and you can then edit it to make your minor changes and then rename it appropriately.

Note:  If your import result in a standard, plain track listing and not a smart playlist, ensure that in step 1 you have remembered to choose XML in the Format drop-down.  Without this important step it won’t export the selection criteria.

Below are a couple of example Smart Playlists that I use to demonstrate their power, and why you may want to copy one rather than recreating it from scratch:

© Richard for The MacTrack - iPhone, iPod, iPod Touch and Mac News, 2009. | Permalink | 2 comments | Add to del.icio.us
Post tags: apple, copy, IPhone, IPod, itunes, smart playlist

Feed enhanced by Better Feed from Ozh

Convert iTunes Store music files

by Kirk McElhearn, Macworld.com

One of the biggest announcements made by Apple during the recent Macworld Expo was the news that, soon, all music sold by the iTunes Store will be free of digital rights management (DRM) restrictions. Currently, some 80 percent of music sold on the iTunes Store is without DRM, with the remainder to follow by the end of March.

While this frees up iTunes Store purchases for playback on other devices, or with other software, there may still be a hurdle if you don’t use a compatible device, or if you want to use these files with Windows software. For the music files sold by Apple are in AAC (Advanced Audio Coding) format. (Contrary to what many believe, this is not a “proprietary” format owned by Apple, but rather part of the MP4 specification.) But not many devices support AAC. Aside from Apple’s offerings, Microsoft’s Zune, the SanDisk Sansa, several Sony devices (the PlayStation Portable, Walkman and some phones), the Sonos Digital Music Player, the Squeezebox, and some other devices can play back AAC files. A handful of player programs support AAC, but not some of the most commonly used Windows programs such as Windows Media Player. But nearly every digital music player can play back the more ubiquitous MP3 format, as can most home DVD players and car stereos (via MP3 CDs).

If you want to take advantage of the vast catalogue of music available on iTunes (while Amazon.com has a broad selection, iTunes still has many exclusive albums, or albums with bonus…

read full article via Convert iTunes Store music files | Playlist | Macworld.

© Richard for The MacTrack - iPhone, iPod, iPod Touch and Mac News, 2009. | Permalink | No comment | Add to del.icio.us
Post tags:

Feed enhanced by Better Feed from Ozh

Easily copy passwords in Keychain Access

by Rob Griffiths, Macworld.com

As you’re probably aware, many OS X applications and features use the system’s built-in keychain to securely store your usernames and passwords—programs like Safari and Mail, and login information for other Macs on your network are but a few examples. You can see and work with this stored information using the Keychain Access program, in the Applications -> Utilities folder. If you’ve ever forgotten a password, for instance, you can look it up in Keychain Access.

Until just recently, I would look up forgotten passwords by double-clicking the appropriate account in Keychain Access, clicking the Show Password box in the new dialog that opened, entering my admin password in the authorization dialog that appeared, then selecting and copying the now-visible password. Ugh. I was sure there must be an easier way, but nothing in the program’s menus seemed to do the trick.

Then a friend pointed me to a much simpler—and for some of you, probably amazingly obvious—method of doing the same thing. In the long list of accounts in Keychain Access, control-click (or right-click) on the account’s name, and select Copy Password to Clipoard from the contextual menu. Enter your admin password in the authorization box and press Return, and you’re done—the password is now on your clipboard.

This feature has existed at least since OS X 10.4, but I only learned of it just recently—yet another reason why I dislike features that only exist in contextual menus!

via Easily copy passwords in Keychain Access | Mac OS X Hints | Macworld.

© Richard for The MacTrack - iPhone, iPod, iPod Touch and Mac News, 2008. | Permalink | No comment | Add to del.icio.us
Post tags: apple, help, keychain, passwords

Feed enhanced by Better Feed from Ozh

Emulate Firefox’s type-ahead search in Safari

Fri, Dec 21 2007 at 7:30AM PST • Submitted by johnga1t

As input managers are in danger in Safari 3.0 and later versions, it might be useful to know that a type-ahead search feature that emulates Firefox can be enabled in Safari using a fairly simple hack that involves native OS X tricks.

To do so, quit Safari and go to System Preferences » Keyboard & Mouse » Keyboard Shortcuts. Click the ‘+’ to add a new shortcut, select Safari as the Application, Find… as the Menu Title, and a temporary (and arbitrary) shortcut as Keyboard Shortcut. (Note that this field does not allow a simple entry, such as ‘/’, but instead requires a modifier key like Command or Option.)

Now go to ~/Library/Preferences and edit com.apple.Safari.plist. (You may be able to just double-click and open the plist in Property List Editor if you have Xcode installed.) Find the NSUserKeyEquivalents entry and edit the string entry for Find…, replacing the arbitrary shortcut you entered earlier with /. This will remove the need for a modifier key, and allow / to activate search.

Now relaunch Safari and type /; you should see the Find box appear, emulating the type-ahead search in Firefox.

via macosxhints.com – Emulate Firefox’s type-ahead search in Safari .

© Richard for The MacTrack - iPhone, iPod, iPod Touch and Mac News, 2008. | Permalink | No comment | Add to del.icio.us
Post tags: apple, browsers, how-to, safari, software, support, tech, tip

Feed enhanced by Better Feed from Ozh

Do you find it a chore to delete a message in Gmail?  Or, do you prefer to use the keyboard rather than moving from mouse to keyboard and back again?

I do.

Here is a handy hint to help, I’ve just revolutionised the way I use Gmail with a few simple keystrokes:

Go to Settings
Go to Labs
Activate Keyboard Shortcuts (you may have to click on settings again to refresh)
Choose Keyboard Shortcuts from within Settings
Locate “Move to Trash” and set it to be “-” (a minus sign)
Locate “Mark as Unread” and set it to “§” (or whatever is the key below the Esc key)

Now from your inbox simply hit the minus key to delete the message, or from within a message, hit minus and it’s gone, moved to Trash in easy one step no mouse needed – or of course you can hit ‘y’ to archive it.
When you delete a message whilst reading it your inbox is then re-displayed.

So, I go: enter (to read) “y” or “-” to archive/trash and then enter again to read next one (and repeat).

It’s *so* quick as” -” and enter (on numpad) are co-located – it’s easy.

Use “§” to mark a a message as unread (I do this if I want to revisit the message for actioning as I keep my inbox empty).  I use the § key as it’s a similar location to Esc and I use it to “escape” back to the inbox leaving the message unread.

Of course, if easier, you can choose other keys if you find them more suitable but make sure they aren’t already allocated to another function.

© Richard for The MacTrack - iPhone, iPod, iPod Touch and Mac News, 2008. | Permalink | One comment | Add to del.icio.us
Post tags: delete a message, gmail, help, hints, how-to, keyboard shortcut, mail, support, tip, tips

Feed enhanced by Better Feed from Ozh

Breaking news about Google’s GMail, it’s updates and enhancements can be found at the GMail Blog

If you like to keep your finger on the GMail pulse then this is a great place to start.

© Richard for The MacTrack - iPhone, iPod, iPod Touch and Mac News, 2008. | Permalink | No comment | Add to del.icio.us
Post tags: blog, gmail, google, googlemail

Feed enhanced by Better Feed from Ozh

Need to rate your iTunes music tracks?  Don’t want to interrupt your current activity by switching to iTunes?  You need I Love Stars

This neat little application sits on the menu bar and allows you to set the iTunes star rating of the track currently playing.  You can do this either by clicking on the appropriate star or, even nicer, the application is mouse scroll-wheel aware so you can simply roll the wheel whilst hovering over the application’s display in the menu bar.

If you right-click on it you can see the current track name and album.

Oh, did I mention?  It’s FREE

Also worth looking at is another, more feature-rich, free application: You Control: iTunes

If you want a quick and simple, no fuss rating tool you be hard pressed to find better than I Love Stars.

© Richard for The MacTrack - iPhone, iPod, iPod Touch and Mac News, 2008. | Permalink | No comment | Add to del.icio.us
Post tags: itunes, menu bar, rating, Scroll wheel, star, stars

Feed enhanced by Better Feed from Ozh

This is a tale of a crashed iPod Touch and it’s subsequent painless restore:

A few days ago my iPod Touch (16GB) crashed and went into restore / recovery mode, or perhaps I put it into restore / recovery mode accidentally. At boot-up it showed the restore / recovery screen: a USB cable being plugged into iTunes (see image on the right).

In case you don’t know:

• to quit a hung application you press and hold the home button, for 5 to 10 seconds
• to force a complete device restart you press and hold the lock/unlock button along with the home button for about 5 to 10 seconds

I’d been having a few problems with it, prior to the crash: it wouldn’t stay connected to my home wi-fi network and had started behaving strangely. I forced a device restart (maybe 2 or 3 times) and it then showed the ‘restore-me’ icon (as described above).

Maybe it ‘decided’ it needed a restore (as system problems were apparent) or maybe I didn’t let go of the home button – I was distracted reading a web page at the time about the upcoming Apple event ( New  MacBooks look amazing BTW).

I re-connected it to iTunes which detected an iPod Touch in restore/recovery mode and offered to re-flash/reload the firmware and operating system and I accepted – the firmware and OS were loaded, verified and the iPod Touch rebooted (took about up 30 mins up until the reboot I think).

(...)
Read the rest of Apple iPod/iPhone restore and recovery (399 words)

© Richard for The MacTrack - iPhone, iPod, iPod Touch and Mac News, 2008. | Permalink | One comment | Add to del.icio.us
Post tags: apple, backup, crash, IPhone, IPod, ipod touch, ipodtouch, itunes, iTunes Store, recover, recovery, restore, touch, Wi-Fi

Feed enhanced by Better Feed from Ozh

It occurred to me today that many people who are new to Apple Macs, MacBooks, iMacs and the Apple Air may struggle getting their mouse to behave as they wish.  By default the right button/right-click is not configured.  This dates back from when the Apple mouse only had one button.

A two button (usually more) mouse is now a standard feature but the Apple system preferences don’t account for this.

So, to activate your right mouse button so that you can right-click on an item simply go to System Preferences, the icon looks like this:

Click on the Keyboard and Mouse icon:

(...)
Read the rest of Making right-click mouse button work on your Apple Mac (37 words)

© Richard for The MacTrack - iPhone, iPod, iPod Touch and Mac News, 2008. | Permalink | 3 comments | Add to del.icio.us
Post tags:

Feed enhanced by Better Feed from Ozh

A useful summary, via the Apple support website, of extra features of the Apple Mac OS X’s dock, and modifier keys that help you manipulate it.

© Richard for The MacTrack - iPhone, iPod, iPod Touch and Mac News, 2008. | Permalink | No comment | Add to del.icio.us
Post tags: apple, dock, help, keys, mac, modifier, support

Feed enhanced by Better Feed from Ozh

Do you wish you could see thumbnail previews of all the tabs you have open in Firefox?  Well now you can with the great Firefox Showcase add-on.

This add-on allows you to display thumbnails of all open tabs in a variety of ways: single window, tab or in a sidebar.

To choose a tab just click on the preview image.  To access the preview thumbnails click on the tab drop-down on the far right of the tab bar.

Try it – you’ll love it!

© Richard for The MacTrack - iPhone, iPod, iPod Touch and Mac News, 2008. | Permalink | No comment | Add to del.icio.us
Post tags: Add-on, firefox, Firefox Showcase, Mozilla Firefox, preview, tabs

Feed enhanced by Better Feed from Ozh

I’ve been using Parallels desktop for a few weeks now and here are my inital impressions.

From the first moment of loading the install package I’ve been really impressed by Parallels implementation of co-hosting Windows on my Mac. From the beginning of the windows install everything has gone smoothly and without any incidents.

I choose ‘Express Install’, ‘Windows XP‘. I was prompted for my windows license key and install disk (it has to be a Service Pack 2 build – see this page for details on how to upgrade your install disk from SP1 to SP2). Parallels handled the windows install from this point onwards performing a quick and efficicent unattended install of Windows XP (no user intervention needed). After a couple of the windows instance restarts (part of the usual Windows rigmarole) I had a brand new clean windows desktop within a Mac application window.

Interestingly, of the many numerous installs I’ve done of Windows (must be well in excess of 100) this was the fastest and smoothest I’ve ever encountered.

Parallels Desktops allow you to run Windows in 3 modes:

(...)
Read the rest of Parallels Desktop: Mini Review (439 words)

© Richard for The MacTrack - iPhone, iPod, iPod Touch and Mac News, 2008. | Permalink | No comment | Add to del.icio.us
Post tags: mac, Microsoft Windows, Operating Systems, Parallels Desktop for Mac, Windows PC, Windows Update, windows xp

Feed enhanced by Better Feed from Ozh

Does your iTunes library need some TLC, attention, cleaning, sorting out and general first aid?  I know mine certainly does, so I was really excited to learn of a potentially great new utility called ‘TuneUp‘, from TuneUpMedia, the features of which are:

Your music collection is a mess. TuneUp fixes it:

• Automatically clean your mislabelled music
• Find your missing cover art
• Be alerted to upcoming concerts based on your collection
• Get the best music content from the web.

Find your missing cover art.

• Automatically search for missing cover art
• Choose from multiple album covers
• No more grey music notes
• Bring sexy back to your iPhone and iPod

Currently only available for Windows users (boo!) but soon to released for Mac users as well (hurrah!).  You can sign-up for a notification when TuneUp is available for the Mac at the TuneUp website or by clicking here.

TuneUp comment about the availablity for the Mac on their blog:

(...)
Read the rest of TuneUp your iTunes library (206 words)

© Richard for The MacTrack - iPhone, iPod, iPod Touch and Mac News, 2008. | Permalink | One comment | Add to del.icio.us
Post tags: apple, clean-up, cleanup, itunes, mac, Macintosh

Feed enhanced by Better Feed from Ozh

If you’d like to keep one particular website separate, in it’s own window and in effect turn it into a mini application then take a look at a free program called Fluid.

Simple to set-up, all that’s required is the web address and you can then create a site specific browser:

Save it on your desktop (or wherever you wish) and you’ve now got an icon for the web site of your choice.

Sometimes is useful to keep sites in their place and locked to one window rather than loosing them in amongst many tabs.  For example, keep eBay, Facebook, or the BBC News web site in their own window allowing them to be located quickly, easily and efficiently.

Perhaps a niche application but a useful one nonetheless.

© Richard for The MacTrack - iPhone, iPod, iPod Touch and Mac News, 2008. | Permalink | No comment | Add to del.icio.us
Post tags: Facebook, fluid, utility, Website

Feed enhanced by Better Feed from Ozh

In my system console log I noticed errors connected with Apple‘s built-in updating routines, and over in Apple’s discussion forum I had a thread describing the problem I was having with the Software Update process. I’m posting details of this issue here in case it proves helpful to others.

Symptoms included errors in the log reading:

• Package Authoring Error: installation-check results requires a message
• JavaScript error “Undefined value” while running “__choice_su_visible”
• __choice_su_visible returned error: Undefined value

At the same time updates that my Mac may have needed were not downloading automatically. It looked like Software Update had failed. (...)
Read the rest of Software Update Error (201 words)

© Richard for The MacTrack - iPhone, iPod, iPod Touch and Mac News, 2008. | Permalink | 2 comments | Add to del.icio.us
Post tags: apple, choice_su_visible, console, log, package authoring error, software, software update, update

Feed enhanced by Better Feed from Ozh

Occasionally, when using iTunes (if iTunes has previously crashed), I come across a fault: iTunes won’t quit, it just reloads itself each time I try to close it. This issue also prevents my Mac from restarting/rebooting unless I do a quick and dirty cold restart (either using the 10s power button method or dropping to a terminal window and issuing a ‘sudo shutdown -r now‘ terminal command).

Further investigations have discovered that the SRS Labs iWow plug-in (see my previous post) is to blame:

Here is some background

(...)
Read the rest of Tip: If iTunes won’t quit (206 words)

© Richard for The MacTrack - iPhone, iPod, iPod Touch and Mac News, 2008. | Permalink | 25 comments | Add to del.icio.us
Post tags: Activity Monitor, can't quit, crash, force quit, genredetection, itunes, Mac OS X v10.5, Plug-in, relaunch, reloads, restarts, srs lab, srs wow, support, tip, won't quit

Feed enhanced by Better Feed from Ozh

If you want to enhance your iTunes audio, for a modest outlay, I thoroughly recommend iWoW by SRS Labs.

This iTunes plug-in gives much deeper and richer bass, and a fully immersive surround sound quality to your music.

At $29.99 it’s worth every cent (or for me in the UK, every penny). Try the free 14 day trial. You’ll never be satisfied with iTunes’ plain vanilla audio again!

The plug-in processes audio in realtime so your actual tracks remain intact and unchanged.

One particularly good feature is it’s (...)
Read the rest of Improve iTunes Audio Quality (154 words)

© Richard for The MacTrack - iPhone, iPod, iPod Touch and Mac News, 2008. | Permalink | 2 comments | Add to del.icio.us
Post tags: apple, audio, enhance, improve, itunes, iwow, labs, Music, Music and Audio, quality, sound, srs, SRS Labs, surround

Feed enhanced by Better Feed from Ozh

If you’re interested in learning about UNIX for the Mac OS X, or perhaps you occasionally need to open a terminal window to force a system restart, or maybe to kill a hung process (for example to restart the Dock) then a good place to begin is osxfaq and it’s UNIX tutorials.

Another good website to look at is MacRumors:Guides and it’s Terminal Commands Guide where you can learn about the delights of sudo and killall (for starters).

Remember: Terminal commands have the potential to be very powerful and wide-ranging, please use them with caution.

© Richard for The MacTrack - iPhone, iPod, iPod Touch and Mac News, 2008. | Permalink | 2 comments | Add to del.icio.us
Post tags: dock, killall, mac os x, sudo, terminal, unix

Feed enhanced by Better Feed from Ozh

Web sites often display pop-up windows, or forms, and suppress the location (address) bar so you cannot see where you’ve been routed to, or the full address of the page that has popped up.

Occasionally, you may close the main Safari window by mistake leaving you with only the pop-up window and no obvious way to edit the address, or to enter a new address.

By pressing Command ⌘ + L Safari will re-display the location bar. This is a simple but very handy trick to wrestle back control of your browser. It’s got me out of a fix on many occasions

© Richard for The MacTrack - iPhone, iPod, iPod Touch and Mac News, 2008. | Permalink | One comment | Add to del.icio.us
Post tags: address bar, how-to, location bar, safari, shortcut, tip

Feed enhanced by Better Feed from Ozh

I thought I’d share a little utility that I use on a daily basis but would be lost without, in fact I don’t really consider it an add-in as it’s used so much. You Control: iTunes gives you full control over iTunes from the menu bar. There are many utilities that can do this but where this one excels, for me anyway, is the ability to rate a song directly from the menu bar without having to switch back to iTunes.

I can already control track playback with my Apple keyboard but was frustrated that firstly, most of my tracks remain un-rated and secondly, to rate a track I had to interrupt what I was currently doing and switch back to iTunes (hence the reason for most of my tracks being un-rated).

The interface to You Control: iTunes is highly configurable allowing you to show as much or as little of the controls as you wish.

Scrolling track and album details can be shown in the menu bar, either (...)
Read the rest of Rate iTunes tracks from the Menu Bar (40 words)

© Richard for The MacTrack - iPhone, iPod, iPod Touch and Mac News, 2008. | Permalink | One comment | Add to del.icio.us
Post tags: bar, control, itunes, menu, menu bar, player, rate, star, tracks

Feed enhanced by Better Feed from Ozh

Have you ever needed to access your Mac when away from the office, your home, or when out and about, for example at an airport, friends house, or internet cafe?  If so then your problems are over:

LogMeIn Free is a great service provided by LogMeIn (surprisingly). Once set-up on your Mac (Windows is also supported) you can securely access it from anywhere in the world. After the software is installed it sits unobtrusively on the menu bar until it receives a valid an authenticated remote control request from the LogMeIn website.

Initially, before you can connect to a computer (be it a Mac or a Windows PC), you have to authorise your LogMeIn account with the machine in question. In other words you have to be sitting at it.

When away from your Mac/PC simply log in to the LogMeIn website and you can see the status of all the remote machines connected to, and authenticated against, your account. Providing the remote computer is switched on and connected to the internet (otherwise it’s status shows as offline) you then simply click on the computer name, follow the prompts, and off you go!

Let me know how you get on, and enjoy your remote access. Hopefully it’ll prove invaluable when you realise you’ve left that all important file behind

© Richard for The MacTrack - iPhone, iPod, iPod Touch and Mac News, 2008. | Permalink | No comment | Add to del.icio.us
Post tags: access, control, free, login, logmein, remote

Feed enhanced by Better Feed from Ozh

Ever wondered what Apple’s Time Machine is actually doing?

Here’s a quick tip on how to view the Time Machine logs:

1. Open the Console utility (found in: /Applications/Utilities)
2. If the toolbar is not showing click on the little lozenge shaped button in the very top right of the console utility
3. In the left hand pane ensure ‘All Messages‘ is selected under the section labelled ‘Log Database Queries‘
4. The search field is located in the top right of the toolbar, labelled ‘Filter’. In this field type in ‘backupd‘ (without the quotes)
5. The right hand pane will update as you type finally restricting the log messages to those relating to the process backupd (the Time Machine process).

You’ll see lots of potentially interesting information (depending on your point of view) including pre-backup and post-backup thinning and the amount of space needed etc.

If you are unlucky you may even see some errors

Here’s a sample (edited) of the sort of output you will see (error free):

No pre-backup thinning needed: 100.0 MB requested (including padding), 267.47 GB available
Copied 14399 files (28 KB) from volume Macintosh HD.
Starting post-backup thinning
Deleted backup 2008-05-08-160302: 267.51 GB now available
Deleted backup 2008-05-08-150256: 267.54 GB now available
Deleted backup 2008-05-08-141309: 267.56 GB now available
Post-back up thinning complete: 3 expired backups removed
Backup completed successfully.

© Richard for The MacTrack - iPhone, iPod, iPod Touch and Mac News, 2008. | Permalink | No comment | Add to del.icio.us
Post tags: console, how-to, log, mac, machine, time, time machine

Feed enhanced by Better Feed from Ozh

By default Firefox only opens one connection at a time when loading a web page.

On fast broadband connections this isn’t usually too much of a problem but should your speed drop at busy times, or if pages seems to load slowly there’s a great little tweak you can implement called “Pipelining”.

It’s also beneficial to fast connections as speed increases can still be seen.

Once ‘pipelining’ is set-up Firefox, will (by default) open many connections simultaneously to the website and retrieve the all the page’s elements in one go. Even on my fast broadband connection this has made a huge difference to my browsing page load times.

To enable Pipelining follow the simple steps below (it looks harder than it really is, in fact it’s fairly simple):

1. In the Firefox address bar enter: about:config and press return/enter
   This displays the internal configuration and system settings of Firefox
2. If prompted, accept the warning message that cautions against modifying the system settings:

   

3. In the filter/search field enter: network.http
4. This restricts the list to the entries for the HTTP protocol

   (...)
   Read the rest of How-to: Speed Up Firefox (244 words)

   ---

   © Richard for The MacTrack - iPhone, iPod, iPod Touch and Mac News, 2008. | Permalink | 3 comments | Add to del.icio.us
   Post tags: firefox, improve, increase, page load, pipelining, speed
   

   Feed enhanced by Better Feed from Ozh

   ]]> http://themactrack.com/2008/03/07/how-to-speed-up-firefox/feed/ 3